diff --git a/scripts/mled-discomode b/cycle-colors.sh
similarity index 74%
rename from scripts/mled-discomode
rename to cycle-colors.sh
index 9050339..aa33a87 100755
--- a/scripts/mled-discomode
+++ b/cycle-colors.sh
@@ -1,12 +1,12 @@
 #!/bin/bash
 
 REFRESHRATE=1
-LEDCONTROLLER="/usr/bin/ledcontroller"
+LEDCONTROLLER="./ledcontroller"
 
 while (true); do
 
   for discoColor in blue red green aqua purple yellow white; do
-
+    echo Set color $discoColor
     $LEDCONTROLLER $discoColor
 
     sleep "$REFRESHRATE"
diff --git a/scripts/README.md b/scripts/README.md
deleted file mode 100644
index 71380c5..0000000
--- a/scripts/README.md
+++ /dev/null
@@ -1,40 +0,0 @@
-# Bash Scripts #
-
-I teared the notifier apart and placed the notifier's board inside my home server.
-Due to its size, the RGB LED creates some interesting optical effects if you place it 2-4cm
-behind the venting holes.
-
-Here are some simple scripts that use various data to set the LED's color.
-
-
-
-## mled-discomode ##
-
-This script simply cycles through all available colors. I called it disco mode due to the optical
-phenomena that take place as the light crosses the air vents.
-
-
-
-## mled-cputemp ##
-
-This script works really well for my machine. It uses the `sensors` program to get the CPU
-temperature.
-
-If the CPU is at or under the low threshold, the LED turns blue. If it is at or above the
-high threshold, the LED turns red. If it is in the middle, it gets green.
-
-It is actually very informative for the machine's state. You can easily detect CPU load.
-
-
-
-## mled-iowait, mled-iowaitdetailed ##
-
-My home server doesn't have any LEDs for HDD activity, though it has plenty of HDDs.
-These two scripts attempt to make up for this shortcoming when I need some quick profiling of the machine.
-They actually work better than common HDD activity LEDs because they are based on iowait percentage in one
-second periods (adjustable).
-
-`mled-iowait` has 3 levels, so you get only to set a low and a high threshold.
-
-`mled-iowaitdetailed` has 6 levels of activity, so you can set 5 thresholds. Also below the lowest threshold,
-it sets the notifier to off, which turns to be a good approach.
diff --git a/scripts/mled-cputemp b/scripts/mled-cputemp
deleted file mode 100755
index 70a6820..0000000
--- a/scripts/mled-cputemp
+++ /dev/null
@@ -1,28 +0,0 @@
-#!/bin/bash
-
-LOWTEMP=46
-HIGHTEMP=53
-REFRESHRATE=1
-LEDCONTROLLER="/usr/bin/ledcontroller"
-
-
-while (true); do
-
-  temperature="$(sensors|grep 'id 0'|sed -e 's/\.0.*//' -e 's/.*+//')"
-
-  if (( "$temperature" <= "$LOWTEMP" )); then
-
-    $LEDCONTROLLER blue;
-
-  elif (( "$temperature" < "$HIGHTEMP" )); then
-
-    $LEDCONTROLLER green;
-
-  else $LEDCONTROLLER red;
-
-  fi;
-
-  sleep "$REFRESHRATE";
-
-done
-
diff --git a/scripts/mled-iowait b/scripts/mled-iowait
deleted file mode 100755
index a948261..0000000
--- a/scripts/mled-iowait
+++ /dev/null
@@ -1,70 +0,0 @@
-#!/bin/bash
-
-LOWTHRESHOLD="1.01"
-HIGHTHRESHOLD="30.2"
-REFRESHRATE=1
-
-LEDCONTROLLER="/usr/bin/ledcontroller"
-
-
-iostat -c "$REFRESHRATE" | while read iostatOutput; do
-
-  iowaitPercent="$(echo "$iostatOutput" | grep -vE "Linux|avg|^$" | awk '{print $4}')"
-
-  [ -z "$iowaitPercent" ] || \
-  if (( $(bc <<< "$iowaitPercent > $LOWTHRESHOLD") == 0  )); then 
-
-    $LEDCONTROLLER blue
-
-  elif (( $(bc <<< "$iowaitPercent > $HIGHTHRESHOLD") == 0 )); then
-
-    $LEDCONTROLLER green
-
-  else
-
-    $LEDCONTROLLER red
-
-  fi
-
-done
-
-
-# This is an older version of the code, which used /proc/stats to do a similar job.
-
-#iowaitCounter="$(grep 'cpu ' /proc/stat | cut -f 9 -d ' ')"
-#$LEDCONTROLLER blue
-#ledcolor="blue"
-#
-#while (true); do
-#
-#  iowaitTemp="$(grep 'cpu ' /proc/stat | cut -f 9 -d ' ')"
-#
-##  echo "iowaitCounter=$iowaitCounter, iowaitTemp=$iowaitTemp"
-#
-#  if (( "$iowaitCounter" == "$iowaitTemp" )); then
-#
-#    if [ "$ledcolor" != "blue" ]; then
-#
-#      $LEDCONTROLLER blue
-#      ledcolor="blue"
-#
-#    fi
-#
-#  else
-#
-#     iowaitCounter="$iowaitTemp"
-#
-#     if [ "$ledcolor" != "red" ]; then
-#
-#       $LEDCONTROLLER red;
-#       ledcolor="red"
-#
-#     fi
-#
-#  fi
-#
-#  sleep "$REFRESHRATE";
-#
-#done
-
-
diff --git a/scripts/mled-iowaitdetailed b/scripts/mled-iowaitdetailed
deleted file mode 100755
index d5ac6c4..0000000
--- a/scripts/mled-iowaitdetailed
+++ /dev/null
@@ -1,44 +0,0 @@
-#!/bin/bash
-
-THRESH1="1.00"
-THRESH2="5.00"
-THRESH3="20.00"
-THRESH4="40.00"
-THRESH5="80.00"
-REFRESHRATE=1
-
-LEDCONTROLLER="/usr/bin/ledcontroller"
-
-
-iostat -c "$REFRESHRATE" | while read iostatOutput; do
-
-  iowaitPercent="$(echo "$iostatOutput" | grep -vE "Linux|avg|^$" | awk '{print $4}')"
-
-  [ -z "$iowaitPercent" ] || \
-  if (( $(bc <<< "$iowaitPercent > $THRESH1") == 0  )); then 
-
-    $LEDCONTROLLER off
-
-  elif (( $(bc <<< "$iowaitPercent > $THRESH2") == 0 )); then
-
-    $LEDCONTROLLER green
-
-  elif (( $(bc <<< "$iowaitPercent > $THRESH3") == 0 )); then
-
-    $LEDCONTROLLER aqua # blue and green
-
-  elif (( $(bc <<< "$iowaitPercent > $THRESH4") == 0 )); then
-
-    $LEDCONTROLLER blue
-
-  elif (( $(bc <<< "$iowaitPercent > $THRESH5") == 0 )); then
-
-    $LEDCONTROLLER purple # red and blue
-
-  else
-
-    $LEDCONTROLLER red
-
-  fi
-
-done