2.1 KiB
| title | subtitle | summary | date | lastmod | highlight |
|---|---|---|---|---|---|
| GRUB Trampoline | Install GRUB on a spare drive | Using a spare drive to act as a trampoline during the boot process. | 2021-05-03T15:28:14+02:00 | 2021-05-03T15:28:14+02:00 | true |
Background
Due to a BIOS bug in my HP MicroServer I have applied this workaround. The MicroServer Gen8 has a bug that prevents the use of the 5th SATA port as the primary boot device. It will automatically attempt to boot from SATA port 1 if a drive is inserted, then port 2 and so forth. By removing all the fixed drives it is possible to make the system boot from port 5.
It is however possible to boot from the internal USB port or the internal MicroSD slot. So to solve this issue we are going to install GRUB onto a spare MicroSD card or a USB stick. The size or quality of the drive should not matter since we only need it for GRUB to jump to the drive present on the 5th SATA port.
Steps
Format the USB/SD Card
Find the correct device identifier.
lsblk
Clear the drive by writing all zeros to the drive (for good measure)
sudo dd if=/dev/zero of=/dev/sdX
Format the disk
sudo fdisk /dev/sdX
Fdisk provides a shell where you can enter commands.
- Set the type to "o" for MSDOS
- Set the disk to be bootable "a"
- Make a new primary partition "n" followed by "n" Accept the remaining as default.
- Use "w" to commit the changes and exit the tool.
Now create a filesystem in the newly created partition.
sudo mkfs -t ext2 /dev/sdX1
Prepare for GRUB install
Create a mount point
mkdir /tmp/mysub
Mount the new parition
sudo mount /dev/sdX1 /tmp/myusb
Create a folder named "boot" on the drive
sudo mkdir /tmp/myusb/boot
Install GRUB
Install GRUB by running the grub-install script
sudo grub-install --boot-directory=/tmp/myusb/boot /dev/sdX
Update the GRUB configuration
sudo update-grub --output=/tmp/myusb/boot/grub/grub.cfg
Test
Finally unmount and reboot
sudo unmount /tmp/myusb
sudo reboot